View Full Version : reset fuse
hsjohnny
01-19-2009, 09:08 PM
:eek:Does any body really know what size the fuse for the fuser reset is supposed to be?
I have seen postings of anywhere from 30ma to 100ma.
Thanks,
John
fixthecopier
01-19-2009, 10:06 PM
Try posting your question again with the model number. Your question is like asking a car mechanic what rear end goes on a chevy????????
pepper38_cnd
01-19-2009, 10:29 PM
:eek:Does any body really know what size the fuse for the fuser reset is supposed to be?
I have seen postings of anywhere from 30ma to 100ma.
Thanks,
John
The OEM in most KonicaMinolta fusers is a 1/16A fuse thats 62mA but what you have seen posted is correct any pico fuse in that range will usually work. You can always get a magnifying glass and check it yourself is marked right on the body of the fuse.
hsjohnny
01-19-2009, 10:40 PM
I did just that, and it said 1/16 in teeny tiny print.
I suppose that is 1/16 th rating at 32 volts as well cause I can't seem to find any rated at 24
Thanks for the clarification
John
pepper38_cnd
01-20-2009, 12:56 AM
I did just that, and it said 1/16 in teeny tiny print.
I suppose that is 1/16 th rating at 32 volts as well cause I can't seem to find any rated at 24
Thanks for the clarification
John
The rating is at 125V but that is irrelevant.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.