View Full Version : A3 i series scan to SMB ver.2/3
Hello,
For A3 i series copier with firmware G00-KD, dip sw 162 set to 01 is for scan to SMB ver.2/3 ?
I think SMB v2/3 should be enabled by default for the i series, noo need to set up dip SW + SMB version can be choosen in admin settings
I think SMB v2/3 should be enabled by default for the i series, noo need to set up dip SW + SMB version can be choosen in admin settings
Thank you for your reply, I checked nothing on SMB setting of admin setting, guess that dip switch may cause of selection of SMB version.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.