PDA

View Full Version : Miscellaneous C3070 Fusing Swing Unit


Custom Search


nikkons
09-23-2022, 12:49 PM
Good evening, has anyone ever changed the fuser swing unit or try to fix some parts on it ? there is no procedure to do this ...

blackcat4866
09-23-2022, 03:25 PM
According to the manual there are factory adjustments to the fuser swing unit that cannot be duplicated in the field. Why do you need to change it?

nikkons
09-23-2022, 05:55 PM
Good evening, has anyone ever changed the fuser swing unit or try to fix some parts on it ? there is no procedure to do this ...

Thanks for your reply ....
There is a malfunction (C3303) to the fans due to a customer fault ...and it needs to be changed ...

Best regards
Nick

blackcat4866
09-23-2022, 06:59 PM
All that I can suggest to you is to carefully scribe & mark each of the slotted adjustments and attempt to reposition the new part in the exact same place. I'm assuming it's the alignment of the fuser in the paper path that's critical, but there may be additional reasons for the adjustments.

Watch for wrinkling of the paper & paper skew (especially second side).

I'll be interested in the results. =^..^=

Afanasy
10-03-2023, 04:06 PM
Hi, hope, it's help.

nikkons
10-03-2023, 04:29 PM
Hi, hope, it's help.

Thank you so much !!!!!!

wjurls
10-03-2023, 05:31 PM
Hi, hope, it's help.

This is great! I've never had to tear into the swing section yet (just disable if needed) but it always seemed like a daunting task.

Like the OP mentioned, there is no procedure in SM for it.

Custom Search