PDA

View Full Version : C454 black drum black band


Custom Search


positiveg
10-11-2022, 03:52 AM
There's a black band I found I think on two separate black drums. I just realises that the black band shows uo I think was on a previous drum as well not sure.
I think it may have been causing some light prints on the far edge of the paper 11x17 and 12x18 prints.
I put in an old black drum, waiting for rhe new one which is set to deliver tomorrow.
I'm attaching a photo of the drum
Thanks
https://uploads.tapatalk-cdn.com/20221011/115dfb8150ebb4aedd2021c52ecfb187.jpg

Sent from my SM-G780G using Tapatalk

allan
10-11-2022, 04:12 AM
Check if the develop on the roller is not raised that side. Could be that is still has an old type mag roller without the splines that got polished.

Toxic
10-11-2022, 08:54 AM
Or dirty charging corona mesh

tsbservice
10-11-2022, 08:57 AM
Looks like rebuild drum unit?

positiveg
10-11-2022, 02:17 PM
Check if the develop on the roller is not raised that side. Could be that is still has an old type mag roller without the splines that got polished.Yeah will pull the developer if it continues having that issue. The two prints I ran after they came out clear. Not aure if it will reappear after a while. If it does then I will definitely pull the developer and take a look. Thanks much

Sent from my SM-G780G using Tapatalk

positiveg
10-11-2022, 02:18 PM
Looks like rebuild drum unit?This one might be

Sent from my SM-G780G using Tapatalk

Custom Search