PDA

View Full Version : IU610 convert to IU612


Custom Search


Toxic
10-22-2022, 12:48 PM
Hey guys,
Does somebody try this convert, i have situation that i have in stock OEM IU610m and i need IU612m for C452.
I work on this series long time ago and never tryed to refurbish, only do complete OEM replacement.
Now one C452 appear with magenta problem and new IU612 is to expensive to order for so old machine and i would like to try to use this iu610 if possible.
By the looks of it OPC is the same but even better will be to put in complete unit, just replace chip.
What is my options?

pickle8486
10-23-2022, 04:12 PM
Honestly I don't think the drum units changed from the c451 series to the c452 series other than the chip. Obviously the old chip will have to be used. So it will show as a used IU not a new one

Sent from my SM-N986U using Tapatalk

escalante
10-24-2022, 08:02 PM
Hey guys,
Does somebody try this convert, i have situation that i have in stock OEM IU610m and i need IU612m for C452.
I work on this series long time ago and never tryed to refurbish, only do complete OEM replacement.
Now one C452 appear with magenta problem and new IU612 is to expensive to order for so old machine and i would like to try to use this iu610 if possible.
By the looks of it OPC is the same but even better will be to put in complete unit, just replace chip.
What is my options?I use the UI610
1.- Cylinder
2.- Blade
3.- Charge crown
4.- Developer
5.- The hubs and beaters
6.- Gear set

For Bizhub C654e and it works perfectly.

Enviado desde mi Infinix X693 mediante Tapatalk

Toxic
10-24-2022, 08:25 PM
So the complete unit iu610 will not fit in C452?

edit:did not see you mention C654

Custom Search