screwdriverassy
11-08-2022, 08:59 AM
[Edit:SOLVED]
Anyone knows what is the software switch setting for switch between "Generic" and "Konica Minolta" for an old bizhub C3350?
I tried 10 hex 02 for Konica, as on his bigger sisters but it does nothing regarding the machines's identity. So I've deduced it uses a different set of values for its SSS.
I didn't find it in the "System 2 -> SSS" chapter in service manual nor in the knova portal.
Thanks in advance.
PS: Controller FW A3GN30G0851-W99, Engine FW A3GN0Y00050G002100
Anyone knows what is the software switch setting for switch between "Generic" and "Konica Minolta" for an old bizhub C3350?
I tried 10 hex 02 for Konica, as on his bigger sisters but it does nothing regarding the machines's identity. So I've deduced it uses a different set of values for its SSS.
I didn't find it in the "System 2 -> SSS" chapter in service manual nor in the knova portal.
Thanks in advance.
PS: Controller FW A3GN30G0851-W99, Engine FW A3GN0Y00050G002100