PDA

View Full Version : Ineo+251 Bizhub C252 Fuser Reset


Custom Search


gedbourke
01-30-2009, 11:58 AM
Any help on resetting the fuser unit on these models. Tried looking for fuse as per +351, but no joy.

perdana
01-31-2009, 04:43 AM
Change the fuse on the fuser 80 ma. If the fuse not blown when you turn on the Machine just open the fuse. its work.

malthus
02-11-2009, 05:32 PM
the unit is resettable with a 60ma fuse available from katun which can be wound round contacts in place of glass fuse . minolta have issued a warning about a fire hazard on the lifes of these units i.e dont reset.
p.s same fuse that comes with di251 pcu rebuild kit

Having a ball
02-13-2009, 09:40 PM
It could be the HV contact if the fuse has not blown, check the fuse (once you have identified were it is) and follow the wiring to see were the contact for the fuse is, you should be able to check for continuity between these points. if there is no continuity it is normally the machine side contact may be bent away from the fuser contact.

Custom Search