View Full Version : KM 250
albano
01-30-2009, 09:40 PM
Hello ! I have a problem with a bizhub 250, display the message ERROR , and nothing else, no number codes.. somebody knows what is it ? thanks.........
vijaysharma
01-31-2009, 04:40 AM
ERROR in display that means RAM is corrupted.
first try to upgrade the firmware if not solve
then you have replaced the RAM for fix the problem.
albano
01-31-2009, 11:01 AM
I' ll try.....
albano
02-06-2009, 10:02 PM
Finally I solve the problem, I change the memory .......I don't know what happened....
redime
02-12-2009, 11:49 PM
Finally I solve the problem, I change the memory .......I don't know what happened....
Sure you do, it had bad memory.
dcopylady
02-13-2009, 08:25 PM
Yes, but not as cut-and-dried. Have a chat with your customer to see if their copier is on a dedicated line (no H2O cooler, personal heater, or building systems etc.. on the same circuit) Ask if they recently had a power outage. This product is HIGHLY SUSEPTABLE to fouling up the NVRAM or the operating system when it receives a sustained voltage drop. Sometimes it will reset if both power switches are turned off, unplugged and allowed to rest for 5-10 minutes. You'll likely see this again at this location:(
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.