Develop ineo+ 258 ghost printing

[a8o2ge]

Hi

I have problem with Develop Ineo+ 258.
Toner - Katun.
Counter - 350000 prints

I have prints with ghoust images.
This is orginal image -
56132
This is print -
56133
What i have tried:
- changed unit's to new
- chaned transfer roller to new
- Fuzer is ok (prints before fuser having ghoust images)

Anyone got ideas?

Happy New Year for everyone! :)

[CP-1015]

Cleaning blade transfer tape.

[tsbservice]

Remove ITB, clean blade section and 2xIDC sensors (only with dry clean cotton swab or piece of cloth). Run stabilization and gradations.

[a8o2ge]

Thanks for the suggestions, I did everything

Remove ITB, clean blade section and 2xIDC sensors (only with dry clean cotton swab or piece of cloth). Run stabilization and gradations.
but the problem is still there.

[ferro10]

If Black and White Molds What Happens? Does the Same Problem Occur?

[copier addict]

Have you tried printing individual colours to see if it's specific to one unit.
Could also be failing erase lamp for one of the colours.