BUSHWACKER
02-03-2009, 01:00 PM
Greetings all,
Thanx for the last tip re error code the red wire was corroded, removed cut back and re soldered fan now a for away.
But the fuser roller section is not turning - if it is released and pulled forward all turns manually
Seems like a drive problem Any hints
Regards
Bush:mad:wacker
Thanx for the last tip re error code the red wire was corroded, removed cut back and re soldered fan now a for away.
But the fuser roller section is not turning - if it is released and pulled forward all turns manually
Seems like a drive problem Any hints
Regards
Bush:mad:wacker