C-452, doc feeder double feeding

[Oystercopy]

Hey guys... I put new rollers in this feeder yesterday (old ones were shot) and did not change the position (that I know of) on the separation tension spring, below the roller. But she's double feeding a lot...
This feeder came from storage, from another C-452 the customer had on hand, so I didn't know the history. But I swapped it because the lift motor on the first one was shot, and they're probably discontinued.

Has anyone had any issues with the one way bearings on these feeders?
OC

[copyman]

Hey guys... I put new rollers in this feeder yesterday (old ones were shot) and did not change the position (that I know of) on the separation tension spring, below the roller. But she's double feeding a lot...
This feeder came from storage, from another C-452 the customer had on hand, so I didn't know the history. But I swapped it because the lift motor on the first one was shot, and they're probably discontinued.

Has anyone had any issues with the one way bearings on these feeders?

OC


Never had any issues with the one ways but have had to try different spring positions after replacing the rollers.