PDA

View Full Version : BH-C_284e, C-6753


Custom Search


Hansoon
01-09-2023, 05:38 PM
Machine came up with C-6753. Did all the advised here in the forum anf manual for such cases. LED-Lamp remains dead and is not lighting immediately as usual when starting up the BH-C-284e.
Removed the DF-701 and the DSIPB as well as all options such as fax-board and LAN cable. Did of course, the trouble reset procedure, but the problem still exists.

Have a donor machine, BH-C-224e, for eventual needed boards, but that one is in storage far, far away from here in a cruelly cold unheated warehouse and to reach the machine, which is on a high shelf, it would need a forklift.

Would love to avoid this all. Any other ideas than swapping boards please?

Hans

Hansoon
01-14-2023, 03:40 PM
*** "SOLVED" ***

More or less solved. After removing all Bells and Whistles and the Bongos too, as well as reseating the both RAM modules and SSD board at the same time, error C-6753 disappeared, and the machine came up. But only after taking over about 5 minutes, first showing two sharkfins all the times before continuing.

Tried several times to install firmware "FW_A5C10Y0-F000-GDT-M1" assuming this is the latest & greatest. It needed three attempts to show for all items “Download Completed”

Never been so confused with firmware versions as with these series. Is "FW_A5C10Y0-F000-GDT-M1" really the best there is for the BH-C-284e, guys?

Hans

Synthohol
01-14-2023, 03:56 PM
gdt-m1 is the latest FW :)

Custom Search