PDA

View Full Version : c250i. STRB is damaged recover help~


Custom Search


xender79
01-19-2023, 11:57 PM
hello..


c250i. STRB is damaged




I was looking for a way to recover STRB with an English translator, but the English translation was wrong.
I connected the STRB to the computer and deleted it.


Is there any way to recover the formatted STRB again?

femaster
01-20-2023, 02:56 AM
Put it back into the machine, Boot directly into a USB flash drive with current firmware on it. Allow the firmware update to run. Once updated, reboot and you should eventually be prompted to "recover data". Choose to recover data and it should be back up and running, with only minimal settings loss.

xender79
01-20-2023, 11:11 PM
Error code D010 is output and there is no recovery message. No access to service mode, no counter touch.


Put it back into the machine, Boot directly into a USB flash drive with current firmware on it. Allow the firmware update to run. Once updated, reboot and you should eventually be prompted to "recover data". Choose to recover data and it should be back up and running, with only minimal settings loss.

femaster
01-22-2023, 12:43 AM
Give this a go, see if it gets you anywhere.

Custom Search