PDA

View Full Version : MINOLTA Di200 diagnostics


Custom Search


Mad_Coachman
02-06-2009, 05:08 AM
I worked for Minolta 5 years ago.I know how to get into diagnostics on the 4000/5000 series is stop 0 stop 1.The Dialta series added an extra level of security.I know I have to go to check meter count...then what's next?I think its a variation on the stop 0 stop 1 theme...PLEASE HELP

fixthecopier
02-06-2009, 11:42 AM
stop o, o, stop, o, 1.

buster68
02-06-2009, 09:13 PM
stop o, o, stop, o, 1.


Hopefully its not a Di200f. Then its a whole different ballgame.

lvangsnes
02-09-2009, 10:44 PM
Stop, 0, 0, stop 0 2 will get you to report printing. You may try variations on the last digit. It seems like stop 0 9 would get you into security mode...I used to work for Minolta as well, and I have forgotten that detail.

Mad_Coachman
02-09-2009, 11:45 PM
Can someone please tell me how to get into diagnostic mode on a Di620,Di450,Di350.Please don't tell me stop 0 stop 1 because that's not it!;)

fixthecopier
02-10-2009, 12:05 PM
Just like I said for the di200, stop, 0, 0, stop, 0, 1. Works on all newer minoltas. The bizhub and 2510/3510 series have extra layer that ask for code. If it has not been changed, it will be all 0's or 1,2,3,4,5,6,7,8.

tango780
02-12-2009, 07:06 PM
Welcome
Gentlemen ....:)
Codes: Stop 00, Stop 01 - applies only to the "Dialta". Of course, after the entry into the counters.

Yours
"tango780" :)

Custom Search