Ep413z exposure lamp

[darkmaster]

How to adjust EP413z exposure lamp light?

[masterteknicion]

You mean a 410 or 415 machine correct. I am sure they are they same though.

[Taminol]

You mean a 410 or 415 machine correct. I am sure they are they same though.

I thought the same, until I Googled EP413z. Looks like they do exist
There was no Service Manual on the KM download site though.
I guess you need to adj the VR on LA1 (if memory serves correct)
Or does this machine do it via F5
It's been soooo long since I looked at one of those.

[Hansoon]

Minolta EP-413z = Sanyo SFT Z 221

Very different and I have unfortunately no idea how to adjust the exposure.

Hans

[buster68]

This is a joke, right!?!?! That series of Minolta copiers is only 20years old. It was the first model I was trained on in 1988.

[darkmaster]

Reply for funny

This is a joke, right!?!?! That series of Minolta copiers is only 20years old. It was the first model I was trained on in 1988.

Yes, you are right!!! may be the machine is old than me but my company still rental that machine for few of company.

[Taminol]

OMG, after reading buster68's quote, I'm amazed it is still running.
I remember the 410Z series, oh those fun days of PU1 repair kits and capacitor mods.
Perhaps you'd better post in the 'other copier models' forum. Poor old Sanyo doesn't get its own forum.

........may be the machine is old than me but my company still rental that machine for few of company.

I can't wait for your questions on cats paws when you upgrade your customer to a 350Z

[cobiray]

I remember those cold solder joints!!! I'm amazed that machine is still running. That should be in the Smithsonian, not out on rental!!!