PDA

View Full Version : jamming in all casset konica 7030


Custom Search


smiley
02-09-2009, 06:23 AM
hi guys any one can help me fix the prdb board of this machine.please.:(

albano
02-09-2009, 09:18 PM
Hi there, do you have more problems with another motors ?, try to check the fuses on the controller board.....

smiley
02-10-2009, 07:37 AM
hi, yup all motors never work and if you press print it says paper jam.

kingarthur
02-10-2009, 02:02 PM
check ICP 11

smiley
02-11-2009, 03:49 AM
check ICP 11
hi kingarthur can please healp me locate the icp 11.please.:)

kingarthur
02-11-2009, 09:01 AM
it's on the PRCB, the small pcb at he rear of the m/c, p/no 26NA-902. On the pcb there is a red led , at the rear right corner, at the front right corner is ICP11, it's probably worth checknig all the ICP's whilst you're at it. The ICP's are easy to replace.

redime
02-12-2009, 11:47 PM
Whats the jam code?

Could be a bad loop/reg clutch.

smiley
03-16-2009, 01:40 PM
hi guys sorry for the late reply i fund out that all motor doens't work.can any one show me the picture of icp 11.please.:)

redime
03-16-2009, 11:04 PM
hi guys sorry for the late reply i fund out that all motor doens't work.can any one show me the picture of icp 11.please.:)
Bottom right corner of board

http://redime.com/images/icp11.jpg

smiley
03-17-2009, 10:49 AM
thank redime i'll will try to change it thank you soo much.:)

Custom Search