View Full Version : C450 code C2352
morgan
02-10-2009, 09:26 AM
Have a C2352 code on C450( toner suction fan motor failure to turn). I have replaced motor m20 and checked connectors for all 4 fans. all 4 fans are turning on boot up, m20 is turning. i have tested the pwb-m board on another c450- no error. have loaded ltest roms and firmware. unit on its way back to workshop, any ideas please
mtech
02-10-2009, 11:40 PM
Only solution I could find from Minolta was: C2351 or C2352 shortly after power up was either bad fan, loose connection, or connectors to PWB-MC cooling fans (M24) or M are switched.
mtech
02-10-2009, 11:47 PM
That was M24 and M25. Sorry, left that out.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.