PDA

View Full Version : Bizhub c353 error code c4154


Custom Search


PrivateCopier
02-13-2009, 04:07 PM
When I turn on my new Bizhub 353, I get a C-4154 error code. Can anyone please help me to find the cause.
Konica technicians claimed there is no code like that.

dcopylady
02-13-2009, 06:32 PM
I wonder if this a counterfeit warning code? These are not typically not published so tech must call in. There info is gathered on the customer and it gets ugly from there. These codes are allowed 3 times before the machine locks and won't reset. Chip must be removed and returned to vendor where the nature of image is discovered. If it is bearer bonds, money etc, (ie, color, 100%, and 2-side) then it goes to FBI. Don't know what happens next.
It is ok to copy money,if it is enlaged, reduced or B/W.

PrivateCopier
02-13-2009, 06:53 PM
In that case there would be no image on the chip since the error displayed since the first start-up.

copytechman
02-13-2009, 07:10 PM
From the Manual:

C4154 Polygon motor rotation
trouble (K)
• The polygon motor fails to turn stably even
after the lapse of a given period of time after
activating the polygon motor.
• Motor lock signal detects HIGH for a given
period time consecutively during the polygon
motor is rotating.

Regards!
A.

PrivateCopier
02-13-2009, 08:37 PM
Thank you, copytechman. This information is really helpful. We appreciate that you shared the information with us.

copytechman
02-13-2009, 08:47 PM
No worries your welcome!
Let us know how it goes!
Regards!
A.

ni311
02-15-2009, 08:57 AM
What about that duplicating money story?!

Haroldbfix
04-08-2009, 06:05 AM
When I turn on my new Bizhub 353, I get a C-4154 error code. Can anyone please help me to find the cause.
Konica technicians claimed there is no code like that.

I now have one doing it. Did you get yours resolved?

PrivateCopier
04-15-2009, 08:41 PM
A Konica Representative came to determine the cause. Is was founded that is was indeed the sensor for the pentagon motor for the K toner.
The machine where replaced the next day and the old one sent back to Korea (so they say) due to factory faults.

Custom Search