PDA

View Full Version : lost password service mode


Custom Search


ralebo
02-14-2009, 09:34 AM
please reset password for enter service mode.
Please like resetar password way service in bizhub 600, is a maquina used and the tecnico previous change the 92729272 and can not go in to adjust it, tank you and excuse by the bad that speak english tank you

ralebo
02-14-2009, 09:37 AM
Excuse the model of maquina is bizhub 600, forget the put it in the post

dcopylady
02-16-2009, 01:47 AM
Please check that all the panel buttons are working, not sticky, and touch screen working as well. I thought 92729272 was factory and could not be changed! This should work unless op panel button is stuck.

kink#2
02-16-2009, 06:04 PM
there is two way to get in, 1 is the minolta way 2 is the konica way.
you can change it in 25 mode. good luck.:)

Custom Search