View Full Version : Hello i need help pls..
tarzak911
02-18-2009, 07:18 AM
KONICA MINOLTA BIZHUB B250/350 / 200
I HAVE AN ABORT CODE 0000999a i cannot fix.. problem seem to appear when printing on the net work. any suggestions pls.
Try whit a new firmware. I only had abort code when my PWB-M was faulty.
tarzak911
02-18-2009, 12:02 PM
Try whit a new firmware. I only had abort code when my PWB-M was faulty.
thnk u tried and did not work problem was faulty ip adress.trust me sounds not real but it was.
elton
03-19-2009, 07:26 PM
i have the same code i have replaced all tthe boards and scanner motor , u say it was the ip adress how can that be my machine has no network card in it
copytechman
03-19-2009, 11:14 PM
If its a bizhub 200/250/350 mono machine anything like all of the ones I have it indeed has a network connection, built into upper right hand side of scanner unit basically!
A.
ciuffe
03-19-2009, 11:24 PM
The new firmware solves the problem.
The following bugs are fixed:
Print from a CAD software, the machine hangs up and does not print anything
Abort 0x0000999a when printing specific PDF file via PS driver
Fax country does not set
Try
What "new firmwarw" are we talking about? I have G30-80 but still get the 0x0000999a abort code?!
(Bizhub 250)
moonwalker3778
07-15-2009, 12:45 PM
crosscheck MFBS board.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.