PDA

View Full Version : Bizhub 250/350 drum life


Custom Search


tech51
02-20-2009, 08:04 AM
I`ve noticed that on some BZ 250/350`s the machine doesnt display the please change PC drum message even though the life is up. Some have gone to 138% of life with no message displayed. Does any one know why this happens?
Your replies would be appreciated.

montana
02-20-2009, 08:39 AM
hi .I guess you have to enable the function in the setup of the machine.:)

fixthecopier
02-20-2009, 12:13 PM
It is a soft switch setting. It should have come new defaulted, to show that message. Someone must have changed it, which is good. The drums and developer will go up to 200,000. Just wait for the call for poor copy quality. The dip switch is 418, bits 3 and 4. Those control "show message" and "stop running" when message is shown.

tech51
02-20-2009, 01:58 PM
Thanks for your help:):):)

redime
02-20-2009, 07:29 PM
Easy way to remember it is the HEX value, just change it to 50 and it will set it correctly as well.

Custom Search