PDA

View Full Version : bizhub 1050 SC 80-02


Custom Search


Vesigoth
02-23-2009, 06:51 PM
pops an SC 80-02 at start up or maybe at warm up. In any case as soon as the initial screen leaves & it says please wait a while, it pops that coce. It's not in the manual. Please help. is it the FSR or is it looking for the fin. or somethhing ?

tech51
02-23-2009, 08:14 PM
This is what the manual says. Ive not had this fault myself but I`d check for loose connectors and possibly re write the firmware.

Overall control board
(OACB)
Printer control board (PRCB)
Loose connection
SC80-02 In the communication check
between the image processing
board (IPB) and the printer control
board (PRCB), an error is detected
from PRCB. Or transmission is not
completed.

Custom Search