PDA

View Full Version : Konica 7022 making clicking noise


Custom Search


k7022_user
02-26-2009, 05:02 PM
Hello All,

I have a 7022 that has started making a clicking sound when printing. It is similar to the sound a wind-up toy makes when it has been wound-up enough. It seems to be coming from the drum area.

Luther
02-26-2009, 05:11 PM
Either the drum auger is bound with toner or it could be one of the feed gears is missing a tooth and needs to be replaced, to eliminate the feed gear try using a diiferent tray other then the primary tray ,try using the bypass and see if the noise goes away,if it does then one of the feed gears is missing a tooth, and by your screename and when you joined the forum i would suspect you are and end user and for either of these problems your going to need a tech, good luck

kiwitechnician
02-26-2009, 08:57 PM
Yeah, I would say the same as luther. Recycle unit might be gone,full or something wrong with driving gears.

Custom Search