healpeful

[zaza]

hell evry technician so l have copier konica 1120 well l he affiched code error F35...so l need open in here service mode to reset this code ..but l can't ..so please healpe me ...maybe it have any type copier in konica same started here mode service ....:o

[Luther]

25 mode set address 47 to 0,good luck

[zaza]

25 mode set address 47 to 0,good luck
hi friend luther have you service manual of this copier ...konica 1120.....because l don't undrestand you :(...please can you more explain :rolleyes:

[pepper38_cnd]

Luther gave you the answer, make sure you don't have a paper wrapped around the upper fuser roller, it's common on these old machines they hate sky shots.

Hold 2 and 5 key while powering on ( 25 mode )
enter 47
press "p" key
enter 0
press the start key
power off then on.

I'm doing this from memory I hope it right, I haven't seen an 1120 in a couple of years and i hope I never do!

[Luther]

ditto, and i dont have a manual for it anymore...........sorry old analog machine. 1015 manual is the same as is the 2223 as far as diagnostics and service codes go.......good luck

[zaza]

thx friend peper38 ...for your assistance ..and l know it is very old machine but it have more copier of this type in my countries ....bye:rolleyes:
Luther gave you the answer, make sure you don't have a paper wrapped around the upper fuser roller, it's common on these old machines they hate sky shots.

Hold 2 and 5 key while powering on ( 25 mode )
enter 47
press "p" key
enter 0
press the start key
power off then on.

I'm doing this from memory I hope it right, I haven't seen an 1120 in a couple of years and i hope I never do!

[Hansoon]

Zaza I have the manual for the almost identical Konica 2223. Click this link:

https://www.yousendit.com/download/U0d3TkZ1YStlaFRIRGc9PQ

Hans

[zaza]

Zaza I have the manual for the almost identical Konica 2223. Click this link:

https://www.yousendit.com/download/U0d3TkZ1YStlaFRIRGc9PQ

Hansthank you very much dear friend hansoon ..and welcome to joint in our group of technician ....if you need more information please asked me in my mail ...mecanopharme@hotmail.fr :D

[zaza]

thank you very much dear friend hansoon ..and welcome to joint in our group of technician ....if you need more information please asked me in my mail ...mecanopharme@hotmail.fr :D
hi friend the konica 1120 is same 2223;)