Steppenwolf
03-14-2009, 06:55 AM
Hi All,
I have had a lot of success with networked printers over the years, but MFPs are relatively new to me, although I have a few successes under my belt.
I thought this would be the best place to come for some help from people who know their stuff inside-out.
I am trying to get a bizhub 500 working with network printing. I can access the web setup page, ping the ip etc.. but I can't seem to get a print job to it. I have used PCL and PS drivers on WinXP. I have tried permutations of the Authentication options. No joy.
Ulitmately, I would like any user physically connected to the network to be able to print without authenticating and I am not worried about usage tracking.
Any help would be appreciated, I am starting to think it is firmware/ROM related, and we may have to call in our vendor.
Thanks,
Stephen
I have had a lot of success with networked printers over the years, but MFPs are relatively new to me, although I have a few successes under my belt.
I thought this would be the best place to come for some help from people who know their stuff inside-out.
I am trying to get a bizhub 500 working with network printing. I can access the web setup page, ping the ip etc.. but I can't seem to get a print job to it. I have used PCL and PS drivers on WinXP. I have tried permutations of the Authentication options. No joy.
Ulitmately, I would like any user physically connected to the network to be able to print without authenticating and I am not worried about usage tracking.
Any help would be appreciated, I am starting to think it is firmware/ROM related, and we may have to call in our vendor.
Thanks,
Stephen