View Full Version : KonicaMinolta bizhub C200
qbert
03-28-2009, 07:30 PM
Hi all,
I have a konica bizhub C200, and want to know how to update the firmware. The machine has the eth port, usb and com.
To upgrade the fw, I need a particular device or can be done through eth?
Also read about the "C250/252/300 and C352 IU reset" could also work for my model ?
Last question, i can update my fw with that of C250 or C3xx?
If you need further details of the machine ask me
Thanks to all
PDF shows you how to update the main firmware, for the printer firmware you copy it to a CF card the same way but you need to enter the service mode and select firmware up grade. the firmware only works for the bizC200.
As far as i know you can not reset the IU`s yet.
h4141
12-21-2010, 04:49 PM
Konica Minolta Bizhub C200
There are drivers here (http://driverswin.com/konica-minolta-bizhub-c200-drivers/)
and software update.
emujo
12-22-2010, 03:22 PM
I want to repair my transmission, I am not a trained mechanic and I don't have any manuals or tools. Can someone please send me the instructions so I can attempt this myself? The only person who is going to be happy with this outcome is the factory mechanic who will eventually spend twice the time fixing what I screwed up and charging me double for his time. Why don't you just call a KM tech???? Let me know how much you wind up spending on your flight of fancy. Emujo
RRodgers
12-22-2010, 04:14 PM
I want to repair my transmission, I am not a trained mechanic and I don't have any manuals or tools. Can someone please send me the instructions so I can attempt this myself? The only person who is going to be happy with this outcome is the factory mechanic who will eventually spend twice the time fixing what I screwed up and charging me double for his time. Why don't you just call a KM tech???? Let me know how much you wind up spending on your flight of fancy. Emujo
/like. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.