View Full Version : print with ic-408
gamalmehdar
03-31-2009, 08:50 AM
when i print pdf document in c-6501 with ic-408 it show me load the paper 8.5 x 11 in any tray . but i need it in A4 papers . how can i resolve this problem.
thanks for all:confused:
tervel12
03-31-2009, 03:04 PM
There is a setting in the Fiery to convert paper sizes A4/A3 to Letter/Tabloid. Turn this feature off in the setup menu.
HORSE
04-08-2009, 06:27 AM
Actually if you want to print on A4 (Metric) you would use convert Letter/Tabloid > A4/A3 not A4/A3 > Letter/Tabloid.
Make sure that paper sizes are set to metric.
These settings can be found in Fiery setup > PDL > PS
Specilist KVN
04-09-2009, 07:50 PM
Actually if you want to print on A4 (Metric) you would use convert Letter/Tabloid > A4/A3 not A4/A3 > Letter/Tabloid.
Make sure that paper sizes are set to metric.
These settings can be found in Fiery setup > PDL > PS
Even better is to simply turn OFF the paper conversion.
this will pick the stock from your driver settings and will NOT try to convert.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.