View Full Version : BROTHER HL2700CN Laser printer

Custom Search

04-02-2009, 11:40 AM
I have an error E1 problem with this printer. I belive it is a Beam Error problem and the user manual just says "Turn off and On" but it does not clear it. I have checked inside for any obvious problems and the laser beam does not seem to be obstructed with any contamination. Any guidance would be much appreciated Thanks

E Winter
04-21-2009, 09:23 AM
If the error says it's something wrong with the laser AND if it's not cleared after turning off/on you'll need to replace the laser assy.

This machine is unreliable crap so I wouldn't recommend to repair it unless it's a warranty case.

Custom Search