PDA

View Full Version : c350 with P31 code.


Custom Search


tarzak911
04-03-2009, 08:16 AM
hi replace sensors in the balck transport drive and change m board.i have also tried another machines mfb and complete set of boards.
during sensor check sensors are ok but the P31 CODE STILL COMES BACK.PLS HELP...:):):):):):):)

mo0651
04-07-2009, 10:49 PM
check your transfer belt. look it over very closely. the home position is not being detected and some piece of reflector may have fallen off. I just replaced a belt that had cracked and tore.:cool:

Custom Search