PDA

View Full Version : c253 with code c2152.... pls help


Custom Search


tarzak911
04-08-2009, 08:35 AM
hi tried new transfer belt and checked works a while then code come back.. has any one encountered this..:rolleyes::confused:;)

copytechman
04-08-2009, 12:35 PM
If you've changed the belt entirely and it's the new style belt (with the new type of sensor bracket) then you need to replace the sensor arm/assy for that part of the machine... not fun, buried in the back behind pretty much everything.. had it happen at least once to us!

Regards!
A.

JSC
04-08-2009, 03:28 PM
Check out the latest technical info...................hope it helps.

Tata
04-08-2009, 05:24 PM
What copytechman says is right on. make sure your belt has the new style sensor bracket. If you replaced the sensor bracket yourself, make sure the plate is in the right place. JSC sent you the pdf. In step 4 just make sure you see the plastic before you put the screw.

tech51
04-08-2009, 08:54 PM
Ther have been more issues since the "final" solution was issued I have attached the troubleshooting guide for this fault. Hope it helps.

JSC
04-08-2009, 10:47 PM
tech51 is correct, i uploaded the wrong pdf. My bag..........

masterteknicion
04-09-2009, 01:42 AM
Try leaving the silver levers on the right hand side out. That is don't put the screws in the in the belt lock levers. Just close the right side cover and let the code reset. Once the code resets and you are able to make copies, then you can put the screws back in. See what happens. I have fixed many 2152 code just by doing that.

Good Luck

tarzak911
04-28-2009, 08:38 AM
thank you everyone

Promise
03-05-2024, 11:00 PM
Ther have been more issues since the "final" solution was issued I have attached the troubleshooting guide for this fault. Hope it helps. plz can I have the pictures in bizhub c550 that is showing 2152

Custom Search