PDA

View Full Version : C500: toner on drums


Custom Search


21043
04-08-2009, 03:39 PM
Hello!

when i remove belt i see a layer of toner on the drum surface - is it normal?

on yellow this layer is biggest, on magenta lighter, on cyan and black there is almost no layer.

Thank you!

PS in a highlighted zone on photo there is a lot of yellow toner.

mahou911
07-25-2009, 03:58 AM
I had a problem close to this one once. Check out if toner on drum is fused on it or if you can erease it. I had a Yellow drum once that had been fused too long with toner on it and I had to change the yellow drum.

Also, your blades could be the source of your problems.

let me know

21043
07-27-2009, 07:31 PM
i can easy wipe it out

texchar555
07-28-2009, 12:31 AM
when was the last time the drum cleaning blades replaced? and how was the transfer belt? one more thing what about the toner waste filter?

Custom Search