View Full Version : OKI fatal error 030
countrytech
04-15-2009, 02:38 AM
Hi can anyone help with an explanation for this error Thanks
copytechman
04-15-2009, 03:06 AM
More info pls.. Model # of oki?
thx!
a.
countrytech
04-15-2009, 03:51 AM
Hi, sorry for that, the oki is a c3530, and I have reseated the RAM and the connections on the main pcb, under the transfer belt. It seems to go through the initialisation process, even though the error message appears very soon after turning on. Thanks
Eric1968
04-15-2009, 06:49 AM
It's a RAM failure (slot 1). Try using another RAM.
countrytech
04-15-2009, 07:26 AM
Tried another 64mb and got the same error.
Where to from here
Thanks
copytechman
04-15-2009, 01:20 PM
Not much to go with that model, says to replace the m32 board if replacing the rams a no go.. I'd crosscheck with oki before doing that though!
Regards!
A.
Eric1968
04-15-2009, 06:36 PM
I agree with copytechman. Here in Holland Oki gives a three year on-site warranty on these machines. i don't know if this also applies to the rest of the world, but I also would first contact Oki on this one.
countrytech
04-15-2009, 11:24 PM
Thanks for your help
I'll contact oki, to see what they say
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.