PDA

View Full Version : BH 1050e


Custom Search


fernan
04-15-2009, 09:48 PM
hello guys
can any one help about my problem on BizHub 1050e,
this machine give me problem for almost a month now,
there is no malfunction code,
the optics unit does not make any initialization when switching on the machine,it warms up, ready to copy/ready to receive print.
but one's i press the start button it does not make any movement optics doesn't scan.BUT IT WAS READY TO COPY, no failure code.
i tried the I/O mode for other motor and sensor its working except for the optics motor (w/c is not giving me the failure code)
i replaced the parts w/c is related in optics (dcps1,motor,scanner board,PRCB sensor and the main CB) but the problem was still same i even tried to ISW the machine.

Just maybe any one of you specially the Konicaminolta technicians encounter or just have an idea on this one for me it is very unusual problem,if it is showing it's failure code it is easy to troubleshoot

i highly appreciate if any one of you guys help me for this

Custom Search