PDA

View Full Version : Konica 1212 Manuals


Custom Search


mrwho
04-21-2009, 11:32 AM
Hello there.

Sorry for bothering you guys with this archaic machine, but I'm really stumped.

I need parts for the fusing unit, but some of the part numbers come back as non-existant. Could be that the factory is no longer making them or could be an error of my part.

If any of you guys can provide me with the manuals for this machine, namely the Parts Catalog (although the Service Manual could also come in handy), it'd be nice.

If you need something, I have many manuals in my possession and I will also gladly help you.

On a side note, does anyone know if there are additional part numbers for 1212 parts (due to the Konica Minolta merger)?

Cheers!

Luther
04-21-2009, 03:11 PM
This machine is identical to the 1015 ,just 12 copies a minute with less features,most of the parts are interchangeable, fuser rollers, temp sensors, drums, developer etc.

Clif
04-21-2009, 05:01 PM
What is your email address? I'll forward the manual to you.

Clif

mrwho
04-21-2009, 05:52 PM
What is your email address? I'll forward the manual to you.

Clif

Send them to takssista at hotmail dot com.

Thanks in advance!

mrwho
04-21-2009, 05:54 PM
This machine is identical to the 1015 ,just 12 copies a minute with less features,most of the parts are interchangeable, fuser rollers, temp sensors, drums, developer etc.

I know, and I used the 1015 manual to check the references. Trouble is, I've been told the fusing claws, fusing claw springs and heat insulating sleeve's part numbers are invalid - even though I checked them twice.

So I'd like to double check them against the 1212 manuals.

Clif
04-23-2009, 12:43 AM
Hello MrWho

I just checked and i can't find a manual for the 1212 but you can find part numbers here: Printer Toner Cartridges - Copier Toner Cartridges - Printer Parts & Copier Parts (http://www.precisionroller.com/)
Sorry for the inconvenience, thought i had that manual.

Clif

Luther
04-23-2009, 12:49 AM
25HA53300-SPRING. 25HA53072-FUSER CLAWS. 25HA53100-SLEEVE,same part #'s for 1212 and 1015

mrwho
04-23-2009, 08:35 AM
Clif and Luther: Thanks both of you for your feedback. I'll check it again to see if I can get that old lady running again. :)

mrwho
04-23-2009, 09:16 AM
Hello MrWho

I just checked and i can't find a manual for the 1212 but you can find part numbers here: Printer Toner Cartridges - Copier Toner Cartridges - Printer Parts & Copier Parts (http://www.precisionroller.com/)
Sorry for the inconvenience, thought i had that manual.

Clif

Cliff, that site seems like a nice alternative to get parts for ageing machines. Are there more sites like that one that we can check for parts - giving preference for sites with good record shipping to the outside of the US?

Thanks again.

mike_archivers
08-02-2009, 11:31 PM
What is your email address? I'll forward the manual to you.

Clif



please include me for those who needed the konica 1212 manual

mike_archivers@yahoo.com

thank you very much....

JustManuals
08-03-2009, 12:03 AM
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals (http://www.justmanuals.com)


Paul@justmanuals.com

Kmdurrin
08-03-2009, 09:27 PM
FYI - The machine is 15 years old. There is a very good chance that the parts you need are NLA (would explain why the part numbers come back as invalid).

Custom Search