PDA

View Full Version : samsung 6345 jamming


Custom Search


billykid18
04-23-2009, 06:58 PM
:mad:I am working on a samsung 6345 and i'm not familiar with these at all... the lead edge goes just beyond the fuser and it stops every time... all the sensors visible seem to be fine...I think it stems from the registration area just beyond the feed...any feed back on issues down there before I rip it all apart??? I think that is where the problem is...anyone have problems with this area???Thanks:mad:

DHTHOMP
03-02-2012, 11:16 PM
Change the fuser sensor flag its warped due to heat buildup from fuser unit.

blackcat4866
03-03-2012, 03:04 AM
What jam codes? =^..^=

copytechman
03-19-2012, 05:30 PM
Also seen the sensor itself fail as it's right above the fuser and that type in particular seems to be rather heat failure prone!

Regards!
A.

JustManuals
03-20-2012, 12:15 AM
Only 3 years too late.

copytechman
03-20-2012, 02:13 AM
Ooops! Didn't notice the date! Dooooh!

My bad!
A.

Custom Search