PDA

View Full Version : DI 200f/Abi Melaibt


Custom Search


mitchl
04-27-2009, 04:41 PM
Yes you can print with this machine with the addition of a PI-3502 controller............. Yes your account is still not working:confused: as I couldn't reply to your thread and had to create a new one!

Abi Melaibt
04-27-2009, 10:07 PM
Thanks mitchl.

What should the price range for this device? And where can I find it?

Do I need another piece of hardware to print thru a network?

mitchl
04-27-2009, 10:14 PM
Thanks mitchl.

What should the price range for this device? And where can I find it?

Do I need another piece of hardware to print thru a network?
Nope, the controller comes with everything you need or should, make sure you get the interface card. I have a few still on the shelf, they are used and tested $200.00 U.S plus shipping, the drivers can be downloaded from any worldwide Konica Minolta site.

Abi Melaibt
04-27-2009, 10:22 PM
...make sure you get the interface card.

Is the interface card included in the controller, or is it sold separetely? (I am not sure what either of these are.)

mitchl
04-28-2009, 03:40 PM
Is the interface card included in the controller, or is it sold separately? (I am not sure what either of these are.)
It does come with the controller and it gets installed into the rear of the copier. The interface then connects to the controller which is also installed in the copier via a cable (which is also included) and its ready for setup!

Abi Melaibt
04-28-2009, 06:53 PM
Would I need another device for scanning?

Custom Search