Di550 comes with C-0049

[petrus]

:confused:Di550 when doing copies the error code c-0049 comes out after 8 copies.-- this refer to paper source option vertical tansport cooling fan malfunction.this machine doesn't comes with the optional parts that mantioned.even I pulled all connector like feeder and fnisher.it still appear.I tried change all pwb from good machine but hopeless.
I have check all cooling fan and motor and that all work propperly.

:pIf anybody have an idea please help me to solve this problem.:)
I've spend 3 days on this machine to make its work.:confused::confused:
:eek:

[8050]

This was from solutions, hope it helps.


Subject:
The Di450 displays Malfunction code C0049, paper source option vertical cooling fan motor malfunction.
Description:
The Di450 displays Malfunction code C0049, paper source option vertical cooling fan motor malfunction.
Solution:
The Vertical transport cooling fan motor rotation: the voltage across PJ4IA-1 on the power supply board and GND should be 24 VDC after the malfunction has been reset. If not, change the control board.

The vertical transport cooling fan motor rotation: the voltage across PJ4IA-3 on the power supply board and GND should be 0 VDC after the malfunction has been reset. If it is 0 volts, change the control board otherwise change the motor.
Please refer to the Field Service Manual (approx. 4 MB) for additional details.

[buster68]

how many paper trays do you have on the Di550?

[time2fly]

I believe that is a code for the main fan in the back buried right in the middle.

[minoltaed]

no thats a c0040 code for the suction fan in the back take off the side cover on transport side u will see the fan

[petrus]

This di550 comes with 3 paper tray.1 & 2 is universal tray and below the duplex is large capacity tray.
I have visually check all the fan is rotating smoothly.
unless the fan cannot be seen outside.

[labish]

C0049
Vertical Transport
Cooling Fan Motor
malfunction
• The Motor Lock signal (H) is detected continuously
even after the lapse of a given period of
time after the motor has been energized

M132 find it and replace the fan. This machine comes with options PF 115 and 208 and the fans made wherever not to put names here are very bad quality. I work with this machines for some times and I've replaced a lot of fans fuser, suctions, optics, power supply but not this one. Hope I help in anyway.

[petrus]

I already found the fan.it a small fan.it located at rear of the machine.
I change it and the machine now works,

thank you all.

[GRICH]

Di470 when doing copies the error code c-0049 comes out after 5copies.-- this refer to paper source option vertical tansport cooling fan malfunction.this machine doesn't comes with the optional parts that mantioned.even I pulled all connector like feeder and fnisher.it still appear.I tried change all pwb from good machine but hopeless.
I have check all cooling fan and motor and that all work propperly.

:pIf anybody have an idea please help me to solve this problem.:)
I've spend 3 days on this machine to make its work.:confused::confused:

[Synthohol]

hope this helps.
https://www.copytechnet.com/forums/attachment.php?attachmentid=61459&d=1707053519

[GRICH]

I already found the fan.it a small fan.it located at rear of the machine.
I change it and the machine now works,

thank you all.

vertical tansport cooling fan!

[GRICH]

Please where exactly is the fan?

[GRICH]

I already found the fan.it a small fan.it located at rear of the machine.
I change it and the machine now works,

thank you all.

PLEASE WHERE IS THIS FAN CANNOT FIND IT
YOU CAN HELP ME with a photo or tell me where it is

[Matoku]

Sorry Guys. this post rotten already. it more then 10 years ago. now We don't do service on Minolta anymore. :cool::cool: