View Full Version : BizHub Pro C6500
Vesigoth
05-05-2009, 06:19 PM
Hey everybody. Got a BizHub Pro C6500 with a C-2211 code at start up. & a C-500 with a C-2701. What are those codes ? Thanks
holger
05-05-2009, 06:55 PM
Hey everybody. Got a BizHub Pro C6500 with a C-2211 code at start up. & a C-500 with a C-2701. What are those codes ? Thanks
BizHub c6500:
When the drum motor/Y (M14)
was ON, M14 abnormality
detection signal was continuously
detected for the specified
time.
Main body
stops immediately
and main
relay (RY1) is
turned OFF.
Printer control board (PRCB)
Drum motor /Y (M14)
Vesigoth
05-05-2009, 07:29 PM
thanks. it's missing yellow drum unit. What about c500 with sc-2701 ?
Setright
06-17-2009, 01:17 PM
The 2211 code sounds like a flipped clean blade on the yellow. There has been a lot of cases of this, and the result is a new type of drum. Different surface and more steep angle on the blade.
Just like the "good olde days" on the Kyocera FS3500 :rolleyes:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.