BizHub Pro C6500

[Vesigoth]

Hey everybody. Got a BizHub Pro C6500 with a C-2211 code at start up. & a C-500 with a C-2701. What are those codes ? Thanks

[holger]

Hey everybody. Got a BizHub Pro C6500 with a C-2211 code at start up. & a C-500 with a C-2701. What are those codes ? Thanks

BizHub c6500:



When the drum motor/Y (M14)
was ON, M14 abnormality
detection signal was continuously
detected for the specified
time.
Main body
stops immediately
and main
relay (RY1) is
turned OFF.
Printer control board (PRCB)
Drum motor /Y (M14)

[Vesigoth]

thanks. it's missing yellow drum unit. What about c500 with sc-2701 ?

[Setright]

The 2211 code sounds like a flipped clean blade on the yellow. There has been a lot of cases of this, and the result is a new type of drum. Different surface and more steep angle on the blade.

Just like the "good olde days" on the Kyocera FS3500 :rolleyes: