View Full Version : Star Print 2000
hardcore
05-11-2009, 06:09 PM
Does any know what causes the machine circuit breaker to pop
after and during warmup no codes!?
KyoceraChris
06-09-2009, 11:23 PM
dead short somewares , time to take out the meter.. check if any boards are touching the frame or crimped wires near or around the fusing area.. Kip's are bad @$$ machines! but a little imtimidating:)
hardcore
06-10-2009, 02:08 PM
Ok, Thanks for the tip! will try to find the short.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.