PDA

View Full Version : bizhub C500 PRO - Line in Magenta


Custom Search


ArtConnexion
05-13-2009, 03:36 PM
Hi,

I am getting a line in magenta,
I replaced:
Magenta DRUM / Magenta Developer Unit / and Charge wires :eek:
and I still get the same line.
Can anyone help me and tell me what can be causing this??

Thank Everybody!!

dudley
05-13-2009, 05:19 PM
pull your transfer belt and drums, then take canned air and blow out below the black plastic bar with the drum potential sensors . Probably a very small piece of lint hanging in the laser path to the drum. Don't forget to clean the laser windows to the right of the dev units.

Custom Search