resolute
05-16-2009, 07:46 PM
Can you use the C65hC High Chroma - TN614 toners in the 6501? -- The toner for the 6501 is TN612. If so -- is it worth it?
Also -- Can I get a confirmation that the 6501 will accept (will fit) a 13.6" wide sheet from the bypass? I have heard and read this in many places.. I realize that the maxium printable area would still be 12.6 (or so) and the spec if for 13" sheet.
And -- is anyone running longer sheets through the machine... I wuold love to be able to run 11 x 25.5 sheets -- producing a 3 panel full size newsletter (folded to 8.5 x 11). Are there any catches to this?
Finally -- I used to have a C500 (thank god that machine is out of my shop).. we used to need 2 fusers -- one for the std. sheets and another for wide. I was told this is not a problem with the 6501... However.. I would like to run envelopes. Runs of 500 or less at a time. Will this damage (ie. leave marks) on the fuser?
Im looking at a 6501 with the IP408 (with auto trap) - Exit tray only, and LCT.
Thanks
Also -- Can I get a confirmation that the 6501 will accept (will fit) a 13.6" wide sheet from the bypass? I have heard and read this in many places.. I realize that the maxium printable area would still be 12.6 (or so) and the spec if for 13" sheet.
And -- is anyone running longer sheets through the machine... I wuold love to be able to run 11 x 25.5 sheets -- producing a 3 panel full size newsletter (folded to 8.5 x 11). Are there any catches to this?
Finally -- I used to have a C500 (thank god that machine is out of my shop).. we used to need 2 fusers -- one for the std. sheets and another for wide. I was told this is not a problem with the 6501... However.. I would like to run envelopes. Runs of 500 or less at a time. Will this damage (ie. leave marks) on the fuser?
Im looking at a 6501 with the IP408 (with auto trap) - Exit tray only, and LCT.
Thanks