kourpetis.athanasios
05-21-2009, 07:28 AM
well first of all when i copy the printed page has 3 cm white margin on the top and onother 3 on the right like you moved the prototype 3 cm left and down on the glass! the other thing that concerns me is that when it goes to finisher after geting out the oven it jams at the end of the first tranfer !
i don't know how to get to the service menu so i can adjust it ! i beleave that there must be an adjustment print or something stored so it can check it self right ?
and if any one of you has the service manual for that machine so i can check the finisher !
athanasios.kourpetis@gmail.com
thanks in advance
i don't know how to get to the service menu so i can adjust it ! i beleave that there must be an adjustment print or something stored so it can check it self right ?
and if any one of you has the service manual for that machine so i can check the finisher !
athanasios.kourpetis@gmail.com
thanks in advance