can please any one inform me how can i calibrate the optics of a 7065 !
it reads where ever it likes fron glass and rdf !
it reads where ever it likes fron glass and rdf !
-
on this world there are 10 kinds of people : those who understant the 01 system and those who don't! -
I don't recall the need of calibrating the 7065's optics. What exactly is the problem you're getting?' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation! -
it start scanning 4 - 5 mm down from the top and leftier from the right side !
leaving a margin from the top and the right side and lose some from the down and left side of the copyed pageon this world there are 10 kinds of people : those who understant the 01 system and those who don't!Comment
-
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
-
yes !
A4
A4R
A3
name it !on this world there are 10 kinds of people : those who understant the 01 system and those who don't!Comment
-
Sorry for the delay, I was unable to reply in the meantime.
Anyway, I looked through my library and didn't find any mention to your problem. My guess is still that you might have all your trays misaligned. Try to adjust the image position for the first tray to see if you have any success. If yes, then adjust the remaining ones (center position, leading edge, etc).
If not, then I'm at a loss of what may be causing that trouble. Sorry. Good luck!' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!Comment
-
thank for the try anyway !
that's what i like most about that kind of forums !
from the other side of the world someone will tell you his idea and probably that small ting is the one that it didn't pass from you head !
agen thanks a lot iven for the trouble !on this world there are 10 kinds of people : those who understant the 01 system and those who don't!Comment
Comment