View Full Version : Oce CS665 // KM C6501 Long Paper Softswitch
resolute
05-28-2009, 04:48 AM
Can someone give me the detailed softswitch dipswitch setting to enable long paper mode (ie. 1200mm//47.25"). My service tech can't seem to get that info.
Si@danwood
05-28-2009, 06:35 AM
Not a 100% sure there is one:confused::confused:
random
05-28-2009, 07:26 AM
I only know of a patch for the Creo, it hasn't been marketed by us so maybe it's a myth.
sbillis
06-01-2009, 08:47 PM
Can someone give me the detailed softswitch dipswitch setting to enable long paper mode (ie. 1200mm//47.25"). My service tech can't seem to get that info.
you can do that but I don't have that info now.
you can send for print 1200mm one by one (<600mm up to 10 >600mm one at a time)
be patient please.
sbillis
06-02-2009, 09:31 PM
try dipsw 10-0-0, 10-1-0
Si@danwood
06-03-2009, 06:09 AM
try dipsw 10-0-0, 10-1-0
why would disabling the hard disk image enable banner mode?:confused::confused:
prakashshetty_thane
02-26-2011, 10:49 AM
Can someone give me the detailed softswitch dipswitch setting to enable long paper mode (ie. 1200mm//47.25"). My service tech can't seem to get that info.
Try and change DIPP SW setting 10-0-0 to 10-0-1 to enable banner mode.
Bypass tray is a must and U can feed only 1 paper at a time and cannot feed another paper unless the first paper has exited the m/c.
Time consuming but effective..
No need to disable the HDD.
seniortech
02-26-2011, 02:06 PM
These are the settings you need for Banner printing:
Set DIP-SW 10-0 to 1
Set DIP-SW 10-1 to 0
Paper is fed via bypass, I have two of these machines that are only used for banner printing, works well without problems.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.