PDA

View Full Version : Konica Minolta C6500 C0101 Error


Custom Search


Marsh2
05-29-2009, 02:37 AM
Hi

can anyone help me please i have a C0101 error code on a C6500 which refers to Paper Feed motor M41 which i have replaced but hasnt worked. It also only seems to happen on duplexing. Has anyone else had this problem.

Cheers Justin

Marsh2
05-29-2009, 05:24 AM
Since Fixed was Duplex Control Board if anyone else gets it. Funny it call a Paper Feed Drive motor not related to duplexer.

Si@danwood
05-29-2009, 08:44 PM
Chances are it was a blown icp on the adu controller pwb.Now here's the thing..Km uk have released an icp list however they have also put a disclaimer on it saying its for "information purposes onll and recomends) pwb replacement blah blah " said list is in my possesion;) ask and you shall receive ....Si

Rohullah
12-09-2019, 05:08 PM
Since Fixed was Duplex Control Board if anyone else gets it. Funny it call a Paper Feed Drive motor not related to duplexer.
Hi Marsh2
You mean Conveyance drive board? Transmission board?
I have the same problem.

Phil B.
12-09-2019, 05:16 PM
Hi Marsh2
You mean Conveyance drive board? Transmission board?
I have the same problem.

this thread has been DEAD for 10 YEARS!!!!!

please stop replying to year old dead threads.

Custom Search