PDA

View Full Version : C253 - C3201


Custom Search


bizhubc253
06-06-2009, 11:49 AM
Got a C253 that throws up a C3201 fuser motor error.

It has a had a replacement fuser motor (two actually), a fuser unit (a further two), a frimware upgrade and a replacement main pcb.

After the last replacement of parts it has worked ok for about a month it has come up with the C3201 error twice in that period but once the errors were reset the unit worked fine. Now it has packed up again and the error will not clear.

Any ideas

abilashvk
06-06-2009, 01:31 PM
hi friend,
What if Ur Power supply PWB not backing the load?Just a curious enquiry.

DCPS
06-06-2009, 03:09 PM
Yep. It's a common problem on them and it's the Power Supply. I had 3 machines until now with this symptom.

bizhubc253
06-06-2009, 05:10 PM
Yep. It's a common problem on them and it's the Power Supply. I had 3 machines until now with this symptom.

Thanks will give a power supply a go.

Custom Search