PDA

View Full Version : Konica 8050 Black Laser unit failure


Custom Search


Zesti
06-10-2009, 06:27 AM
Hi guys,
I intend to start this thread for a typical problem in Konica 8050. The black laser units tend to fail due to polygon motor failure. Can anyone put some light on the issue and remedy to rectify or prevent the problem.
Thanks

pspahr
06-10-2009, 01:08 PM
try cleaning out the fan ducts and the cooling fins on the unit.

Zesti
06-10-2009, 02:08 PM
pspahr
Yes that was done already. I got 2 bad units. Got any replacement units.

mahou911
07-25-2009, 05:00 AM
I have many

write back to

martin.houle.4@gmail.com

Custom Search