jmanly
06-18-2009, 02:45 PM
It seem that there is a thin layer of yellow over the entire print. The first print yesterday was fine, then all others had a yellow coating. Any ideas?
brenni
06-18-2009, 02:57 PM
sound very much like develepoer not ok.
replace iu to check; or, if you have developer, remove 15g from the iu und add lets say 20 or 25g.
also clean led bar and corona
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.