francois
06-19-2009, 12:33 PM
i have a b 421 with a sc code 6001, i replaced the ccd unit and nou it is giving me c-d 203 it does not help to reset the code an if i put the old ccd unit back into the m/c it have the same problem
buster68
06-19-2009, 07:11 PM
The ribbon cable from the CCD to the OACB is pinched to ground with new style plate that covers the cable. Have had this on every one of our 501/421 units in the past month...about 30 units. Remove the plate, insulate your cable with some tape and replace the plate, but don't tighten the screws.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.